Foundation Size and Cost Estimator | Brick & Bolt

Foundation Size and Cost Estimator

Foundation cost estimator is designed to help you estimate the cost of your foundation accurately.

Disclaimer:
The costs indicated are approximate costs . Actual cost estimates may vary for your city. Please check with our technical expert for a more accurate costing or visit your municipality office for any queries.

Packages

Find the best home construction packages.*

Find the best home construction packages.*

Currently showing for

bengaluru
  • Bengaluru
  • Chennai
  • Hyderabad
  • Mysuru
  • NCR-Delhi
  • NCR-Faridabad
  • NCR-Ghaziabad
  • NCR-Gurgaon
  • NCR-Noida
  • Pune
  • Basic
  • Classic
  • Premium
  • Royale

Basic Package - ₹1,810/sq.ft (Incl. GST)

  • Architectural Layout | 2D
  • Basic Elevation
  • Structural Design
  • 3D Elevation

  • Steel - Sunvik or Prime Gold or Kamadhenu or equivalent
  • Cement - Dalmia, Bharathi or equivalent of 43 or 53 grade
  • Aggregates - 20mm & 40mm
  • Blocks - Standard Solid Concrete blocks. 6 inch & 4 inch
  • RCC Design Mix - M20 / M25 or As per the structural designer recommendation
  • Ceiling Height - 10 feet (Finished Floor level to Finished Floor level)

  • Ceramic Wall Dado - Upto Rs.40 per Sqft
  • Main Sink Faucet - Upto Rs.1300
  • Any other Faucet or Accessories - ISI Marked
  • Kitchen Sink - Stainless Steel of Single Sink make worth Rs. 3,000

  • Ceramic Wall Dado upto 7' height - Upto Rs.40 per Sqft
  • Sanitarywares & CP fittings upto Rs. 30,000 per 1000 Sqft of Cera make
  • CPVC Pipe - APL Apollo or Equivalent
  • Bathroom doors - Waterproof flush doors or WPC

  • Windows - Aluminium Windows with glass shutters and mesh shutters (3 track with 1 mesh) of Jindal Profiles
  • Main Door - Flush Door with Veneer. Sal wood frame of 5 inch by 3 inch, worth Rs.20,000 including fixtures.
  • Internal Doors - Membrane doors / Flush Door with Laminates upto Rs.11,000 including fixtures. Door Frames of Sal Wood 4 inch by 2.5 inch.

  • Interior Painting - JK Putty + Tractor Emulsion or equivalent
  • Exterior Painting - Asian Primer + Ace Exterior emulsion Paint or equivalent

  • Living & Dining Flooring - Tiles of value upto Rs.50 per sqft
  • Rooms & Kitchen Flooring - Tiles of value upto Rs.50 per sqft
  • Balcony and Open Areas Flooring - Anti-skid tiles of value upto Rs.40 per sqft
  • Staircase Flooring - Sadarahalli Granite of value upto ₹ 70 per sqft
  • Parking Tiles - Anti-skid tiles of value upto ₹ 40 per sqft

  • All wiring shall be done with fire proof wires of Finolex silver FR or equivalent.
  • Switches & Sockets - Legrand Allzy or equivalent

  • Overhead Tank - Double Layered tank of 1000 Ltrs of Apollo make
  • Underground Sump - 4000 Ltrs
  • Staircase Railing - MS Railing
  • Window Grills - Basic MS Grill with enamel Paint at Rs. 195 per Sqft

Get in touch with us!
LET'S BUILD

Classic Package - ₹1,940/sq.ft (Incl. GST)

  • Architectural Layout | 2D
  • Basic Elevation
  • Structural Design
  • 3D Elevation
  • Electrical Drawings
  • Plumbing Drawings

  • Steel - Jindal or equivalent
  • Cement - Dalmia, Bharathi or equivalent of 43 or 53 grade
  • Aggregates - 20mm & 40mm
  • Blocks - Standard Solid Concrete blocks. 6 inch & 4 inch
  • RCC Design Mix - M20 / M25 or As per the structural designer recommendation
  • Ceiling Height - 10 feet (Finished Floor level to Finished Floor level)

  • Ceramic Wall Dado - Upto Rs.60 per Sqft
  • Main Sink Faucet - Upto Rs.2000
  • Any other Faucet or Accessories - ISI Marked
  • Kitchen Sink - Stainless Steel of Single Sink make worth Rs. 6,000

  • Ceramic Wall Dado upto 7' height - Upto Rs.60 per Sqft
  • Sanitarywares & CP fittings upto Rs. 50,000 per 1000 Sqft of Hindware or Parryware make
  • CPVC Pipe - APL Apollo or Equivalent
  • Bathroom doors - Waterproof flush doors or WPC

  • Windows - UPVC Windows with glass and mesh shutters (3 track with 1 mesh) of Lesso Eiti or equivalent make
  • Main Door - Teak Door With Teak frame of 5 inch by 3 inch, worth Rs.30,000 including fixtures.
  • Internal Doors - Membrane doors / Flush Door with Laminates upto Rs.11,000 including fixtures. Door Frames of Sal Wood 4 inch by 2.5 inch.

  • Interior Painting - JK Putty + Tractor Shyne Emulsion or equivalent
  • Exterior Painting - Asian Primer + Apex Exterior Emulsion Paint or equivalent

  • Living & Dining Flooring - Tiles or Granite of value upto Rs.100 per sqft
  • Rooms & Kitchen Flooring - Tiles of value upto Rs.80 per sqft
  • Balcony and Open Areas Flooring - Anti-skid tiles of value upto Rs.60 per sqft
  • Staircase Flooring - Sadarahalli Granite of value upto ₹ 80 per sqft
  • Parking Tiles - Anti-skid tiles of value upto ₹ 50 per sqft

  • All wiring shall be done with fire proof wires of Finolex silver FR or equivalent.
  • Switches & Sockets - Legrand Lyncus or Schneider Liva or equivalent
  • UPS Wiring Provision

  • Overhead Tank - Double Layered tank of 1500 Ltrs of Apollo make
  • Underground Sump - 6000 Ltrs
  • Staircase Railing - MS Railing
  • Window Grills - Basic MS Grill with enamel Paint at Rs. 195 per Sqft

Get in touch with us!
LET'S BUILD

Premium Package - ₹2,250/sq.ft (Incl. GST)

  • Architectural Layout | 2D
  • Basic Elevation
  • Structural Design
  • 3D Elevation
  • Electrical Drawings
  • Plumbing Drawings

  • Steel - Jindal or equivalent
  • Cement - ACC or Ultratech or equivalent of 43 or 53 grade
  • Aggregates - 20mm & 40mm
  • Blocks - Standard Solid Concrete blocks. 6 inch & 4 inch
  • RCC Design Mix - ACC or Ultratech M20 / M25 or As per the structural designer recommendation
  • Ceiling Height - 10 feet (Finished Floor level to Finished Floor level)

  • Ceramic Wall Dado - Upto Rs.80 per Sqft
  • Main Sink Faucet - Upto Rs.3500
  • Any other Faucet or Accessories - ISI Marked
  • Kitchen Sink of Stainless Steel or granite Finish worth Rs. 8,000 (Futura, Carysil)

  • Ceramic Wall Dado upto 7' height - Upto Rs.80 per Sqft
  • Sanitarywares & CP fittings upto Rs. 70,000 per 1000 Sqft of Jaquar make
  • CPVC Pipe - APL Apollo or Equivalent
  • Bathroom doors - Waterproof flush doors or WPC
  • Mirror, Soap Dish, Towel Rail - Worth Rs. 7,000 till 1000 ft of Construction
  • Solar water heater provision

  • Windows - UPVC Windows with glass and mesh shutters (3 track with 1 mesh) of Prominance or NCL Veka or equivalent make
  • Main Door - Teak Door With Teak frame of 5 inch by 3.5 inch, worth Rs.40,000 including fixtures.
  • Internal Doors - Membrane doors / Flush Door with Laminates upto upto Rs.13,000 including fixtures. Door Frames of Sal Wood 4 inch by 3 inch.
  • 1 Pooja Room Door - Burma Teak along with Teak frame of 5inch by 2.5 inch, worth Rs. 28,000 for every 2,000 sft package area

  • Interior Painting - JK Putty + Apcolite Premium Emulsion or equivalent
  • Exterior Painting - Asian Primer + Apex Exterior Emulsion Paint or equivalent

  • Living & Dining Flooring - Tiles or Granite or Marble of value upto Rs.140 per sqft
  • Rooms & Kitchen Flooring -Tiles or Granite or Marble of value upto Rs.120 per sqft
  • Balcony and Open Areas Flooring - Anti-skid tiles of value upto Rs.80 per sqft
  • Staircase Flooring - Sadarahalli Granite of value upto ₹ 110 per sqft
  • Parking Tiles - Anti-skid tiles of value upto ₹ 70 per sqft

  • All wiring shall be done with fire proof wires of Finolex silver FR or equivalent.
  • Switches & Sockets - Legrand Mylinc or equivalent
  • UPS Wiring Provision

  • A Sintex Double layered overhead tank of - 2000L shall be provided. Any Additional capacity shall be chargeable at INR 9 per L. Platform for the OHT shall be charged additional based on the design and specifications
  • Underground Sump - 7000 Ltrs
  • Staircase Railing - SS (Stainless) Railing of SS 304 grade profiles
  • Window Grills - Basic MS Grill with enamel Paint at Rs. 195 per Sqft

Get in touch with us!
LET'S BUILD

Royale Package - ₹2,480/sq.ft (Incl. GST)

  • Architectural Layout | 2D
  • Basic Elevation
  • Structural Design
  • 3D Elevation
  • Electrical Drawings
  • Plumbing Drawings
  • Furniture Plan

  • Steel - Jindal or equivalent
  • Cement - ACC or Ultratech or equivalent of 43 or 53 grade
  • Aggregates - 20mm & 40mm
  • Blocks - Standard Solid Concrete blocks. 6 inch & 4 inch
  • RCC Design Mix - ACC or Ultratech M20 / M25 or As per the structural designer recommendation
  • Ceiling Height - 10 feet (Finished Floor level to Finished Floor level)

  • Ceramic Wall Dado - Upto Rs.90 per Sqft
  • Main Sink Faucet - Upto Rs.3500
  • Any other Faucet or Accessories - ISI Marked
  • Kitchen Sink of Stainless Steel or granite Finish worth Rs. 8,000 (Futura, Carysil)

  • Ceramic Wall Dado upto 7' height - Upto Rs.90 per Sqft
  • Sanitarywares & CP fittings upto Rs. 80,000 per 1000 Sqft of Kohler make
  • CPVC Pipe - APL Apollo or Equivalent
  • Bathroom doors - Waterproof flush doors or WPC
  • Mirror, Soap Dish, Towel Rail - Worth Rs. 9,000 till 1000 ft of Construction
  • Solar water heater provision

  • Windows - UPVC Windows with glass and mesh shutters (3 track with 1 mesh) of Fenesta or equivalent make
  • Main Door - Teak Door With Teak frame of 5 inch by 3.5 inch, worth Rs.50,000 including fixtures.
  • Internal Doors - Membrane doors / Flush Door with Laminates upto Rs.15,000 including fixtures. Door Frames of Sal Wood 4 inch by 3 inch.
  • 1 Pooja Room Door - Burma Teak along with Teak frame of 5inch by 2.5 inch, worth Rs. 32,000 for every 2,000 sft package area

  • Interior Painting - JK Putty + Royale Luxury Emulsion or equivalent
  • Exterior Painting - Asian Primer + Apex Ultima Exterior Emulsion Paint or equivalent

  • Living & Dining Flooring - Tiles or Granite or Marble of value upto Rs.160 per sqft
  • Rooms & Kitchen Flooring -Tiles or Granite or Marble of value upto Rs.140 per sqft
  • Balcony and Open Areas Flooring - Anti-skid tiles of value upto Rs.90 per sqft
  • Staircase Flooring - Sadarahalli Granite of value upto ₹ 140 per sqft
  • Parking Tiles - Anti-skid tiles of value upto ₹ 70 per sqft

  • All wiring shall be done with fire proof wires of Finolex silver FR or equivalent.
  • Switches & Sockets - Legrand Myrius, Schneider Unica Pure or equivalent
  • UPS Wiring Provision
  • 1 EV Charging Point at Ground floor

  • A Sintex Double layered overhead tank of - 2000L shall be provided. Any Additional capacity shall be chargeable at INR 9 per L. Platform for the OHT shall be charged additional based on the design and specifications
  • Underground Sump - 8000 Ltrs
  • Staircase Railing - SS (Stainless) Glass Railing of SS 304 grade profiles
  • Window Grills - Basic MS Grill with enamel Paint at Rs. 195 per Sqft
  • 1 Copper gas connection for every dwelling unit of 1,500 sft package area

Get in touch with us!
LET'S BUILD

Foundation Cost Calculator

At Brick & Bolt, we understand that planning a construction project can be daunting, especially when it comes to stepwise home construction cost estimation. Hence, our foundation footing cost calculator is here to help you. Brick & Bolt’s foundation cost estimator is designed to help you estimate the cost of your foundation quickly and accurately, ensuring you stay on budget and make informed decisions. This easy-to-use tool eliminates uncertainty around cost calculation and gives you an expense idea for your home foundation to support efficient planning and budgeting.

Why Use a Foundation Cost Estimator?

Accurate Estimations

One of the main reasons our footing foundation cost calculator is the best is its accuracy. Our calculator generates accurate estimates for foundation cost per sq ft based on the inputs you provide, considering your project-specific data. By this significant detail of your project, you can get an accurate cost breakdown that precisely reflects the expenses you will really spend. This precision guarantees that your budget is both reasonable and all-inclusive while also assisting you in avoiding unexpected expenses.

Customizable Inputs

At Brick & Bolt, we recognise that every construction project is unique, and hence, our calculator allows for that. You can customize your inputs based on your built-up area, foundation depth and construction package. This flexibility ensures that the estimates you receive are tailored to your project’s needs.

Instant Results

Any construction project has a time constraint. With the help of our foundation cost estimator, you can get your home foundation price estimation quickly and make well-informed choices. Simply enter the specific details of your project, and in a matter of seconds, you will receive a comprehensive cost detail. So, there is no need to wait for a contractor to deliver you an estimate.

Features of the Foundation Price Calculator

User-Friendly Interface

The foundation cost calculator is designed to be simple to use. Even those with a minimum of expertise in building may easily utilize the tool and get the information they need thanks to its simple design. The calculator's user-friendly layout makes it simple for anybody to enter data and get precise answers without difficulty.

Inputs Flexibility

Our calculator allows you to enter your project-specific details, such as your home's built-up area, foundation depth and suitable construction package. By considering the given data, our foundation price estimator considers the standard soil-bearing capacity type of foundation, the size of plinth beam and other factors. It reduces the need for technical knowledge and architectural drawings. Along with ease, this flexibility in change will ensure that your home foundation cost estimate is as precise as possible.

Detailed Cost Breakdown

Our calculator doesn't give you one round figure or a single amount. Your home foundation cost is divided into categories such as construction activity, such as, Total Foundation Cost Excavation Cost Reinforcement Cost Footing Concrete cost Column Raise and Concrete Cost This thorough analysis shows you where your money is going and gives potential areas for savings.

How to Use the Foundation Cost Calculator

Select the Package Type You Choose for Your Construction

Select the construction package type as per your convenience from the dropdown option.

Enter the Built-Up Area of the Project

Enter the specific built-up area of your project. Remember, It’s crucial to add accurate data to get a precise foundation price estimation.

Enter the Foundation Depth

Enter the foundation depth of your project recommended by your architect and structural engineer.

Click "Calculate" to Get an Instant Estimate.

Once you have entered the required information, press the "Calculate" button. After processing the data, the calculator will give you a quick estimate of the cost.

Example of Foundation Cost Calculation

Let’s take an example of your foundation cost calculation. So, assuming you are planning a home construction and the following are your project-specific data. Construction Package: Basic Package (1890 RS/SQFT Incl. GST), Built-up Area: 1000 sq ft., Recommended Foundation Depth: 3 ft. So, now, add your requirements in the dropdown sections accordingly and click on the ‘calculate’ option. Here you go! Your foundation cost estimation is ready. See how simple and easy it is.

Benefits of Using Our Foundation Price Calculator

Stay on Budget

One key benefit of our foundation cost calculator is that it helps you stay within your budget. By getting an accurate cost of the foundation upfront, you can better manage your finances and avoid overpaying for that particular construction activity.

Make Informed Decisions

Brick & Bolt’s foundation price calculator provides a detailed cost breakdown, allowing you to make informed decisions about your dream home construction project. You can check where your money is spent and determine if there are any possible areas where you can cut costs without compromising on quality.

Save Time

Our foundation cost estimator saves your time by giving instant cost estimates. So, there’s no need to wait for any professionals and contractors to get back to you with a quote. In only a few minutes, you have the necessary information, which will help you proceed with your dream project faster. Brick & Bolt's Foundation Cost Calculator is an essential tool for anyone who is planning for any construction project, such as building a dream home or a commercial property. With accurate foundation cost estimations, customizable inputs, and instant results, you can confidently plan your foundation costs and make informed decisions for your project. So, try our calculator today and eliminate any uncertainty from your building budgeting.

Frequently Asked Questions About Foundation Cost Calculator

How Do I Calculate Footing Size for My Home Foundation?

To calculate footing size, first, you have to determine the vertical and horizontal loads, then evaluate the soil-bearing capability, and choose the right type of footing. To get the exact foundation footing area, divide the net load by the soil-bearing capability. It’s recommended to verify local codes, take settlement into account, and repeat as necessary. In addition, you can take the help of experts like Brick & Bolt.

What is the Average Home Foundation Cost Per Square Foot?

Your average home foundation price per square foot is 250 to 300 rs. But remember your price will vary as per your location and specific project details like foundation depth, number of floors, materials you choose, type of soil, complexity of construction, market conditions, weather conditions etc.

Can I Customize the Inputs for My Specific Project?

Yes, our foundation cost estimator is designed to accommodate your project-specific details. You can modify variables like built-up area, foundation depth, and construction package to ensure that your quote accurately matches your unique project requirements.