Anchor piles are important in construction and are widely used in civil engineering. They play a crucial role in supporting lateral load weights and are used extensively in marine and retaining walls. However, they also have their own limitations. Understand the anchor pile foundations in this blog and utilise them in your construction.
Anchor Pile Foundation
Anchor piles are a specialised type of deep foundation that are used in construction to transfer loads in different directions. They are generally used in complicated applications such as offshore moorings to resist uplift forces, and they can also withstand lateral load weights.
Anchor piles are called vertical ground, frictional, and foundation anchors. These materials are made of reinforced concrete, cement, and timber. When looking to perform an anchor pile foundation, it is crucial to look into the pile’s capacity, soil resistance, and anchor connection capacity is also checked.
Applications of Anchor Pile Foundations
Anchor piles are used in both commercial and residential areas to provide foundational strength. Some of the applications are explained below:
Retaining Walls
Anchor piles are used to retain walls in the field of civil engineering. They are adhered to the soil and reinforced with rods or cables to make the structure stronger. It is an alternative to a traditional gravity-based approach, thus preventing soil erosion. Anchored piles can also be used in retaining walls to secure road cuts, protect slopes, and build high walls on them.
Marine Construction
Anchored piles are used in marine constructions as they provide support to offshore platforms and undersea tunnels. Additionally, anchor piles are used in the construction of bridges to support lateral loads, in oil rigs to maintain potion in deep waters, in floating docks, and as a coastal defence that protects the shore from erosion.
Building Foundations
The general application of an anchored pile is in building foundations. It is cost-effective compared to concrete foundations and doesn’t need excavations or Shoring. This foundation can be swiftly installed, and there is no waiting time for it to settle. It can be taken to the next step in a couple of minutes.
Agricultural Structures
Anchored piles can also be used in agricultural structures to anchor grain bins and storage facilities. Additionally, they can be used to anchor or fix tents on agricultural land. It provides protection from the wind and requires no concrete.
Power Transformer
It is a safe and fast method to secure a power transformer. It doesn’t affect the polarity but does not provide any hindrance to the transformer’s working. It can also be used with a concrete foundation to offer additional support.
Advantages of Anchor Pile Foundations
There are several advantages of anchor pile foundations, and some of them are explained below:
Fast Installation
Anchor piles can be used as conventional construction equipment. They are fast and inexpensive as they do not need a crane. Generally, one labourer and one operator are required. The rate of installation is around 6 to 10 rpm and can take up to thirty seconds. The installation is not dependent on the weather conditions.
Immediate Load Carrying Capacity
They can be loaded readily after installation. There is no need to wait for the concrete to cool down or wait for excess pressure to settle. In case of any emergency response or if the construction time is limited, they are great alternatives to traditional concrete.
Installation of Hard Soil Conditions
Anchored piles can be used in remote areas where there is little to no mobilisation, and the cost is generally higher. In some cases, the sites are congested and have limited headroom spaces. In such hard conditions, anchored piles offer extended sections for low headroom.
Wide Range of Soil Application
They can be installed in different ranges of subsurface conditions, from soft soil to clay cliffs. Design loads have a range of applications that are required for the project and can be as high as 650 kips.
Limitations of Anchor Pile Foundations
There are certain disadvantages of anchor pile foundations, and a few of them are listed below:
Limited Load Capacity
Anchored piles are generally limited to the type of soil and are higher than grain size, less than 60% of the pitch helices. Anchor piles don’t fix better in cobble deposits or gravels. This reduces the strength due to its fast operational time.
. This reduces the strength due to its fast operational time.
Cost of Material
They are generally low cost but the price of the anchor pile can vary depending on grain size, type of soil, and limitations of torque. This can affect the anchored pile foundations in a negative way.
Type of Soil
Anchored piles can be limited depending on the soil. Har or rocky soil are not suitable for anchor piles. Large rocky areas can increase the time and cost. Sensitive soils can cause displacements and are important to analyze soil type before undergoing any pile process.
The Construction Process of Anchor Pile Foundations
The general process of anchor pile foundations are explained below:
- The site needs to be investigated to understand the soil conditions, groundwater levels, and other parameters.
- The anchor piles are selected for the process depending on the soil condition
- The ground is then drilled to create holes. Anchor piles are then installed in these holes and are rotated into the ground using specialised equipment.
- To fill any holes, grouting is injected.
- Steel cables are installed in the drilled hole and are connected to anchor piles these uplift forces and add stability.
- Load tests are performed and safety is ensured. The file is then capped.
Conclusion
Anchor pile foundations are versatile materials that are used in construction. They can be used in marine, bridges, and in other tough environments where lateral weight plays a crucial role. It is important to hire experts to perform this in your construction.
FAQs
Anchored piles are primarily used to withstand weights in lateral loads and can be used in different applications.
The advantages of anchored piles are they are cost-effective, they can be quickly installed and won’t take time to start functioning, they can be used in different soil conditions, and they can effectively reduce vibration and noise.